RTA - GMD / GMH (EUROCARD) - Stepping Motor Drive

Introduction

• Stepping motor drives series with Step & Direction interface and realized with SMD technology in single EUROCARD format card (100×160 mm).
• System backward-compatible with the previous series (with PTH technology) equipped with a 32 pole, DIN 41612 form D connector. Drives designed to be assembled inside a RACK complete with motherboard.
• Target: multi-axes applications requiring backward-compatibility with the previous series.

Highlights

• Mechanical, electric and applicative backward-compatibility with the previous series drives.
• Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
• Standard input and output signals facilitate the interface with the most common control systems.
• Particular care dedicated to obtain top performance and low power losses for both the card and the motor, limiting the need for forced ventilation.

Technical Specifications

• Version: open frame drive in 100 x 160 x 45 mm.
• Range of operating voltage: 55-180 VDC.
• Range of current: 1.6-12 Amp. Setting up to eight possible values by means of dip-switches
• Microstepping: 200, 400 or 800 steps /revolution Setting by means of dip- switches.
• Automatic current reduction at motor standstill.
• Possibility to switch off motor current with an external logic signal.
• Protections:
  -Protection against under-voltage and over-voltage.
  -Protection against a short-circuit at motor outputs.
  -Overheating protection.
• Operation with a single external power supply.
• Electronic resonance damping facility.
• Two separated and co-working electronic circuits to ensure acoustic noise and mechanical vibration reduction at low and medium speed.
• Warranty: 24 months.